Description
25mm Pull Cord Roller Blind Motor with Rechargeable Battery
The SIXINSMART SX-TM25LA-R is a 25mm pull cord roller blind motor combining local pull control with Radio+ two-way remote control. It is designed for compatible roller blinds and Roman shades, with 1.1N·m torque and a maximum load of 6.5kg.
A built-in 2600mAh lithium-ion battery powers the motor. USB-C 5V charging supports compatible phone chargers and power banks, while an optional solar panel provides an additional charging option.
Pull Cord Control: Lower, Stop and Raise
The pull cord provides a convenient way to trigger motorized blind movement directly at the window.
- First pull: The motor lowers the blind.
- Second pull: The motor stops.
- Third pull: The motor reverses direction and raises the blind.
Each pull acts as a control command. The battery-powered motor provides the movement after the command is triggered.
This control method gives users a practical local operating option alongside the compatible Radio+ remote control.
Radio+ Two-Way Remote Control
Radio+ two-way communication supports operation through compatible remote control equipment. Users can operate the blind from the matching remote while retaining pull cord control at the window.
Battery-level feedback helps users and installers plan charging. The information displayed depends on the selected compatible controller or receiver.
2600mAh Battery with USB-C Charging
The built-in rechargeable lithium-ion battery allows the motor to operate without bringing permanent power wiring to the blind. Recharge through the USB-C interface using a compatible 5V USB charging source.
Three Charging Options
- Phone charger: Recharge using a compatible 5V USB charger.
- Power bank: Recharge through USB-C using a compatible power bank.
- Optional solar panel: Use a compatible panel to replenish the internal battery over time.
DC5V describes the USB-C charging input. The motor operates from its built-in rechargeable battery.
Up to 6 Months per Charge
The 2600mAh battery supports up to 6 months of operation on a full charge, based on one complete opening and one complete closing per day. Actual charging intervals vary with blind travel, operating frequency, load and environmental conditions.
Optional Solar Charging
A compatible solar panel can replenish the battery over time and reduce manual charging when sufficient light is available. Solar charging performance depends on panel placement, light availability and motor usage.
USB-C charging remains available when additional charging is needed. Confirm the solar panel and charging accessories required for your order.
Quiet Operation Below 32dB
Operating noise below 32dB makes the motor suitable for indoor roller blind and Roman shade installations in bedrooms, living rooms, offices and meeting spaces.
Jog Control, Third Position and Electronic Limits
Jog Control for Fine Adjustment
Jog control provides small movements for adjusting shading and daylight. Use compatible control equipment to make incremental position adjustments.
Third Position Setting
Set an additional intermediate stopping position between the upper and lower travel limits for a preferred partially open blind position.
Electronic Travel Limits
Electronic limits define the upper and lower stopping positions. Configure these limits during installation according to the motor’s setup instructions.
Slat Angle Adjustment
Slat angle adjustment is supported when the motor is connected to a compatible slatted blind mechanism. In standard roller blinds and Roman shades, the motor controls fabric movement.
Technical Specifications
- Brand: SIXINSMART
- Model: SX-TM25LA-R
- Product type: Rechargeable tubular blind motor with pull cord and remote control
- Main applications: Compatible roller blinds and Roman shades
- Motor diameter: Φ25mm
- Motor length: 410mm
- Torque: 1.1N·m
- Maximum load: 6.5kg
- Output speed: 20rpm
- Rated power: 9W
- Motor power source: Built-in rechargeable lithium-ion battery
- Battery capacity: 2600mAh
- Charging input: DC5V
- Charging interface: USB Type-C
- Charging options: Compatible phone charger, power bank or optional solar panel
- Battery runtime: Up to 6 months per charge, based on one opening and one closing per day
- Local control: Pull cord control
- Pull control sequence: Lower, stop, then raise
- Wireless communication: Radio+ two-way communication
- Remote control: Supported with compatible Radio+ accessories
- Battery-level feedback: Supported through compatible control equipment
- Operating noise: Below 32dB
- Jog control: Supported
- Third position setting: Supported
- Slat angle adjustment: Supported with a compatible slatted blind mechanism
- Travel limit type: Electronic limits
- Maximum limit turns: Unlimited, indicated as ∞ in the specification sheet
- Specified running time: 6 minutes
- Working temperature: 0–40°C
- Protection rating: IP20
- Installation environment: Dry indoor locations
- Compliance information: CE and FCC-ID are listed on the specification sheet. Request the applicable documentation for your order.
For Blind Fabricators, Shading Contractors and Wholesale Buyers
The SX-TM25LA-R combines rechargeable operation with two practical control methods: pull cord operation at the window and compatible Radio+ remote control.
- Blind fabricators: Select compatible tubes, drive adapters, crowns and mounting components.
- Shading contractors: Plan motor installation, pull cord access and USB-C charging access.
- Distributors and wholesalers: Define motor, remote control and charging accessory configurations for repeat orders.
- Project buyers: Request dimensional drawings, control instructions and an itemized accessory list before procurement.
Frequently Asked Questions
How does pull cord control work?
Pull once to lower the blind, pull again to stop the motor, then pull again to reverse direction and raise the blind.
Does pulling the cord trigger motorized movement?
Yes. The pull acts as a control command, and the motor uses its built-in battery to move the blind.
Can the motor also be operated by remote control?
Yes. The motor supports compatible Radio+ remote control equipment alongside its pull cord control.
What feedback does this model provide?
This model supports battery-level feedback through compatible control equipment. How that information is displayed depends on the selected controller or receiver.
How long does the battery last?
The built-in 2600mAh lithium-ion battery supports up to 6 months per charge, based on one complete opening and one complete closing per day. Actual runtime varies with usage and installation conditions.
How can the motor be charged?
Use a compatible 5V phone charger or power bank through the USB-C interface. An optional compatible solar panel can also replenish the internal battery.
Is the solar panel included?
The solar panel is optional. Confirm the charging accessories, remote control and mounting components included in your quotation.
Does DC5V describe the internal battery voltage?
DC5V describes the USB-C charging input. The motor operates from its built-in rechargeable battery.
What is the maximum load?
The SX-TM25LA-R has 1.1N·m torque and a maximum load of 6.5kg.
What is the third position setting?
It is an additional intermediate stopping position between the upper and lower travel limits, allowing a preferred partially open blind position to be set.
Can this motor adjust blind slat angles?
Yes, when connected to a compatible slatted blind mechanism. Standard roller blind and Roman shade fabric does not have adjustable slats.
Will it fit every blind tube with a similar diameter?
Check the blind tube profile, internal dimensions, drive adapter, crown and mounting components. The 25mm motor diameter alone does not establish tube compatibility.
What are the motor dimensions?
The motor diameter is 25mm and the specified motor length is 410mm. Use the dimensional drawing together with the selected adapters and mounting components when checking installation space.
Is the motor suitable for outdoor installation?
The IP20 motor is intended for dry indoor installation. Any optional solar panel must be installed according to its own environmental rating and instructions.
Request a Wholesale or Project Quotation
Contact SIXINSMART for SX-TM25LA-R pull cord and remote control blind motor enquiries. Provide the required quantity, destination country, blind type, blind dimensions, moving load and tube details.
Include your remote control, charging and mounting accessory requirements so that the quotation can identify the correct components for your project or wholesale order.




