25mm RS485 Roller Blind Motor | DC12-24V, 1.1N.m, Radio+ RF Two-Way Feedback, Remote Control for Roller and Roman Blinds

The SIXINSMART SX-TM25DE-485 is a 25mm RS485 roller blind motor for roller blinds and Roman shades. Powered by an external DC12–24V supply, it combines wired serial control, Radio+ two-way communication and RF remote operation.

  • RS485 wired control: Integrates with controllers or gateways that support the motor’s DOOYA-compatible 0x55 command protocol.
  • Radio+ two-way communication: Supports control commands and feedback through compatible equipment.
  • 0–100% position feedback: Reports blind position for compatible control interfaces.
  • Operating status feedback: Provides motor operating information to compatible controllers or receivers.
  • 433MHz remote control: Convenient raise, lower and stop operation using a compatible RF remote.
  • 1.1N·m torque: Maximum load of 6.5kg.
  • Quiet operation: Specified motor noise below 32dB.
  • Jog adjustment: Make small changes to blind position for light and privacy control.
  • Third preset position: Store a preferred intermediate travel position.
  • Electronic limits: Set upper and lower travel endpoints electronically.
  • Slat-angle adjustment: Supported with a compatible slatted blind mechanism.
  • Compact dimensions: 25mm diameter, 30rpm speed and 270mm overall length.

IP20 protection for dry indoor installations. Contact SIXINSMART for wholesale pricing, protocol documentation and project enquiries.

Description

25mm RS485 Roller Blind Motor for Roller Blinds and Roman Shades

The SIXINSMART SX-TM25DE-485 is a 25mm RS485 roller blind motor powered by an external DC12–24V supply. It delivers 1.1N·m torque and supports a maximum load of 6.5kg for compatible roller blind and Roman shade systems.

This tubular blind motor combines wired RS485 control with Radio+ two-way communication and compatible 433MHz RF remote operation. It supports 0–100% position feedback, operating status feedback, electronic travel limits, jog adjustment and a third preset position.

With a 30rpm motor speed and a 270mm overall length, the SX-TM25DE-485 provides a compact motor option for blind fabricators, shading contractors, control-system integrators, distributors and wholesale buyers.

Wired RS485 Integration

The RS485 interface provides a wired connection for integration with compatible serial controllers and gateways. The control system must implement the motor’s command protocol to send supported commands and interpret feedback.

Command protocol: DOOYA-compatible proprietary RS485 protocol using the 0x55 command format.

For integration, match the controller or gateway to the motor’s communication documentation, including serial settings, addressing, command frames and feedback parsing. An RS485 interface alone does not establish software compatibility.

Contact SIXINSMART for the communication documentation applicable to the supplied motor configuration.

Radio+ Two-Way Communication

Radio+ two-way communication supports control commands and feedback through compatible equipment. This provides an additional control option alongside the wired RS485 interface.

For project commissioning, verify that the selected remote, receiver or controller supports the required commands and feedback functions.

0–100% Position Feedback and Operating Status Feedback

The motor supports position and operating status feedback for compatible control interfaces.

  • Position feedback: Reports blind position within a 0–100% range.
  • Operating status feedback: Provides information about motor operation.
  • Control-system integration: Feedback must be interpreted and displayed by compatible receiving equipment or software.

The feedback fields available to the user depend on the selected interface and its implementation of the motor protocol.

433MHz RF Remote Control

A compatible 433MHz RF remote allows convenient raise, lower and stop operation. Direct RF remote control provides a practical option for everyday use and installation checks.

Communication distinction: RS485 is the wired serial interface. The 433MHz specification refers to the separate RF remote-control link.

External DC12–24V Power Supply

The motor operates from an external 12–24V DC power supply. This low-voltage input is suitable for installations where DC power is provided at the window or through the project’s power distribution arrangement.

The specification lists a rated power of 9W and a rated current of 0.5A. Confirm the power supply, wiring arrangement and connectors against the installation requirements.

1.1N·m Torque and 6.5kg Maximum Load

The SX-TM25DE-485 delivers 1.1N·m torque and supports a maximum load of 6.5kg. Its specified motor speed is 30rpm.

The 25mm tubular design is intended for compatible blind assemblies. Check the tube profile, drive adapter, crown, mounting brackets and available installation space when specifying the motor for a project.

Quiet Operation Below 32dB

The specified motor operating noise level is below 32dB. This quiet roller blind motor is suitable for dry indoor shading applications where low operating noise is an important requirement.

Jog Adjustment for Light and Privacy Control

The jog function moves the blind in short increments, allowing small changes to its position. This helps users adjust daylight and privacy without completing a full opening or closing movement.

Access to jog operation depends on the selected remote or control interface.

Third Preset Position

A third preset position allows a preferred intermediate travel position to be stored between the upper and lower limits. This provides a repeatable stopping point for everyday shading preferences.

Preset recall depends on the functions supported by the selected control device.

Electronic Upper and Lower Limits

Electronic limits allow the upper and lower travel endpoints to be set for the installed blind. These endpoints define the blind’s normal opening and closing range.

Slat-Angle Adjustment with Compatible Mechanisms

The motor supports slat-angle adjustment when used with a compatible slatted blind mechanism. This function adjusts slat orientation for light and privacy control.

Roller blinds and Roman shades normally control shading by raising and lowering. Slat-angle operation requires suitable mechanical components.

Technical Specifications

  • Brand: SIXINSMART.
  • Model: SX-TM25DE-485.
  • Product type: RS485 tubular blind motor with RF remote control.
  • Main applications: Roller blinds and Roman shades.
  • Motor diameter: 25mm.
  • Torque: 1.1N·m.
  • Maximum load: 6.5kg.
  • Motor speed: 30rpm.
  • Power supply: External DC power supply.
  • Rated input voltage: DC12–24V.
  • Rated power: 9W.
  • Rated current: 0.5A.
  • Wired communication interface: RS485.
  • RS485 command protocol: DOOYA-compatible proprietary 0x55 command format.
  • Controller requirement: Compatible implementation of the motor’s serial command protocol.
  • Additional communication technology: Radio+ two-way communication.
  • RF remote-control frequency: 433MHz.
  • Position feedback: 0–100%.
  • Operating status feedback: Supported.
  • Remote control: Supported with a compatible RF remote.
  • Operating noise: <32dB.
  • Jog adjustment: Supported.
  • Third preset position: Supported.
  • Slat-angle adjustment: Supported with a compatible blind mechanism.
  • Limit system: Electronic limits.
  • Maximum limit turns: ∞, as listed in the specification.
  • Specified running time: 6 minutes.
  • Working temperature: 0–40°C.
  • Protection rating: IP20.
  • Length L1: 262mm.
  • Overall length L2: 270mm.
  • Certification information listed on the specification sheet: CE, FCC-ID.

RS485 Blind Motor Wholesale and Project Enquiries

The SX-TM25DE-485 is intended for roller blind manufacturers, Roman shade fabricators, shading contractors, automation integrators, distributors and wholesalers sourcing low-voltage blind motors with wired control and RF remote operation.

For a quotation or technical review, provide the required quantity, blind type, tube profile, installation dimensions, DC power arrangement, controller or gateway model, required feedback functions and destination market.

Contact SIXINSMART for wholesale purchasing, RS485 protocol documentation and project configuration enquiries.

Frequently Asked Questions

What is the SX-TM25DE-485?

It is a SIXINSMART 25mm tubular motor for roller blinds and Roman shades, combining wired RS485 control with Radio+ two-way communication and RF remote operation. It uses external DC12–24V power and provides 1.1N·m torque with a 6.5kg maximum load.

Which RS485 command protocol does the motor use?

The motor uses a DOOYA-compatible proprietary 0x55 command format. Integration requires a controller, gateway or software driver that supports the corresponding motor commands and feedback.

Does an RS485 connector guarantee controller compatibility?

No. The controller must support both the electrical interface and the motor’s command protocol. Serial settings, addressing and command interpretation must match the motor communication documentation.

Can it be integrated into an automation system?

Integration is possible through a controller or gateway that implements the motor’s RS485 protocol. Confirm driver support and the required control and feedback functions for the project.

Does the motor provide position feedback?

Yes. The motor supports 0–100% position feedback and operating status feedback. Displaying this information requires compatible receiving equipment or software.

Can I also use a remote control?

Yes. A compatible 433MHz RF remote provides raise, lower and stop operation alongside the wired control interface.

Does direct remote control require internet access?

No. Direct operation through a compatible RF remote does not require an internet connection.

What power supply does the motor require?

The motor requires an external 12–24V DC supply. The specification lists a rated power of 9W and a rated current of 0.5A.

What is the maximum load?

The maximum load is 6.5kg, with a motor torque of 1.1N·m.

How quiet is the motor?

The specified motor operating noise level is below 32dB.

What do the jog function and third preset position do?

Jog adjustment moves the blind in short increments. The third preset position stores an intermediate travel position for repeat use through a compatible control interface.

Can it adjust blind slat angles?

Yes, when installed with a compatible slatted blind mechanism. Roller blinds and Roman shades normally adjust shading through raising and lowering.

Does it use electronic limits?

Yes. The motor supports electronic setting of the upper and lower travel endpoints.

What are the motor dimensions and speed?

The motor diameter is 25mm and the specified speed is 30rpm. Length L1 is 262mm, and overall length L2 is 270mm. Check the blind tube and drive adapter dimensions separately for mechanical compatibility.

Is the motor suitable for outdoor installation?

The motor has an IP20 protection rating and is intended for dry indoor installations.

How can contractors and wholesalers request a quotation?

Contact SIXINSMART with model SX-TM25DE-485, the required quantity, blind type, installation dimensions, power arrangement, controller or gateway model and destination market.