Description
35mm Solar Powered Roller Blind Motor for Roller and Roman Blinds
The SIXINSMART SX-TM35LE-R is a solar-powered rechargeable tubular motor for roller blinds and Roman shades. It combines a built-in 4500mAh lithium-ion battery, Radio+ two-way remote communication and USB-C charging.
With 3.0N·m torque and a maximum load of 15kg, this 35mm motor provides remote-controlled shading, battery-level feedback and electronic travel limits for indoor blind installations.
Solar charging helps replenish the battery during everyday use, while USB-C charging supports compatible phone chargers and power banks. The system suits blind fabricators, shading contractors and wholesale buyers seeking rechargeable motorization.
Solar Charging with a Built-In 4500mAh Battery
A compatible solar panel replenishes the internal lithium-ion battery using available light. The battery stores this energy and powers the motor when the blind moves.
This arrangement helps reduce manual recharging where the panel receives sufficient light. Actual solar charging performance depends on panel positioning, available light and daily energy consumption.
Three Charging Options
- Solar panel charging: Replenish the battery over time using a compatible solar panel installed in a suitable location.
- USB-C phone charger: Recharge through the Type-C port with a compatible DC5V USB charger.
- USB power bank: Recharge with a compatible portable power bank.
DC5V refers to the USB-C charging input. The built-in battery supplies power during motor operation.
Up to 6 Months per Full Charge
The 4500mAh battery provides up to 6 months of operation per full charge, based on one opening and one closing each day.
Actual battery life varies with blind travel, load, operating frequency and installation conditions. USB-C charging remains available when additional charging is needed.
Radio+ Two-Way Remote Control
Operate the blind with a compatible Radio+ remote controller. Radio+ supports two-way communication between the motor and matching control equipment.
The specified radio frequency is 433MHz. Select a compatible Radio+ controller for the motor and the functions required by the installation.
Battery-Level Feedback
Battery-level feedback helps users monitor available charge and plan recharging. How battery information is displayed depends on the compatible controller or receiving equipment.
Local Remote Operation
A compatible Radio+ remote communicates locally with the motor. Remote-controller operation does not require an internet connection.
Quiet Operation and Flexible Light Adjustment
Operating Noise Below 32dB
The motor operates at a specified noise level below 32dB, supporting quiet movement in indoor shading installations.
Jog Adjustment
Jog control moves the blind in short increments for fine adjustment of daylight and privacy.
Third Preset Position
Set an additional preferred stopping position between the upper and lower travel limits for convenient everyday shading.
Slat-Angle Adjustment
When installed with a compatible tilting blind mechanism, the motor supports slat-angle adjustment for daylight and privacy control.
Electronic Travel Limits
Set the upper and lower stopping positions electronically to define the blind’s operating travel.
Technical Specifications
- Brand: SIXINSMART
- Model: SX-TM35LE-R
- Product type: Solar-powered rechargeable tubular blind motor
- Main applications: Roller blinds and Roman shades
- Motor diameter: 35mm
- Motor length: 600mm
- Overall length: 624mm
- Torque: 3.0N·m
- Maximum load: 15kg
- Motor speed: 20rpm
- Rated power: 24W
- Motor power supply: Built-in lithium-ion battery
- Battery capacity: 4500mAh
- Battery life: Up to 6 months per full charge, based on one opening and one closing daily
- Solar charging: Supported with a compatible solar panel
- Charging connector: USB Type-C
- USB charging input: DC5V
- Alternative charging sources: Compatible USB phone charger or power bank
- Communication: Radio+ two-way communication
- Remote-control radio frequency: 433MHz
- Control method: Compatible Radio+ remote controller
- Battery-level feedback: Supported with compatible equipment
- Operating noise: Below 32dB
- Jog adjustment: Supported
- Third preset position: Supported
- Slat-angle adjustment: Supported with compatible blind mechanisms
- Travel limits: Electronic limits
- Maximum limit turns: Unlimited, as listed in the specification sheet
- Specified running time: 6 minutes
- Working temperature: 0–40°C
- Protection rating: IP20
- Installation environment: Dry indoor locations
- Compliance information listed in the specification sheet: CE / FCC ID. Request applicable documentation for the selected configuration.
Applications for Contractors, Blind Fabricators and Wholesalers
This 3Nm solar rechargeable blind motor supports indoor shading projects requiring remote control and flexible charging arrangements.
- Roller blind fabrication: Rechargeable motorization for compatible roller blind assemblies.
- Roman shade systems: Motorized operation using suitable drive hardware.
- Interior retrofit projects: Battery-powered shading where routing permanent power to the blind is inconvenient.
- Wholesale distribution: Motor and accessory sourcing for blind fabricators, shading contractors and distributors.
Match the tube, drive adapters and mounting components to the intended blind assembly. Specify the solar panel, remote controller and charging accessories required for the project.
Frequently Asked Questions
What is the SIXINSMART SX-TM35LE-R?
It is a 35mm solar rechargeable tubular motor for roller blinds and Roman shades, with a 4500mAh battery, 3.0N·m torque, a maximum load of 15kg and Radio+ two-way remote communication.
How does solar charging work?
A compatible solar panel replenishes the internal battery using available light. The battery stores energy and powers the motor during blind movement.
Can solar charging support long-term operation?
Solar charging can support ongoing operation where the panel receives enough light to replenish the energy used. Available light, panel placement and daily motor use affect performance.
How long does one full battery charge last?
A full charge provides up to 6 months of operation, based on one opening and one closing daily. Actual battery life varies with blind travel, load and operating frequency.
Can I also use a phone charger or power bank?
Yes. The USB-C charging port accepts DC5V from a compatible USB phone charger or power bank.
How is the motor controlled?
The motor operates with a compatible Radio+ remote controller using 433MHz radio communication. Select matching Radio+ equipment for the installation.
Does remote control require internet access?
No. A compatible Radio+ remote communicates locally with the motor for remote-controller operation.
Does the motor provide battery-level feedback?
Yes. Battery-level feedback is supported through compatible Radio+ equipment. The display of battery information depends on the selected controller or receiver.
What is the maximum load?
The motor delivers 3.0N·m torque with a maximum load of 15kg.
What are the motor dimensions?
The motor diameter is 35mm. The specification sheet lists a motor length of 600mm and an overall length of 624mm. Match the tube, adapters and mounting arrangement to the intended blind assembly.
What are jog control and the third preset position?
Jog control provides short incremental movements for fine light adjustment. The third preset provides an additional preferred stopping position between the upper and lower limits. Slat-angle adjustment requires a compatible tilting mechanism.
Is the motor suitable for outdoor installation?
The motor has an IP20 protection rating and is intended for dry indoor installations. Install the solar panel according to the panel’s own specifications.
What is included in the solar configuration?
Package contents depend on the quotation. Confirm the motor, solar panel, connection cable, remote controller, drive adapters and mounting components before ordering.
Request a Wholesale or Project Quotation
Contact SIXINSMART for SX-TM35LE-R 3Nm solar blind motor wholesale pricing and project enquiries. Provide your quantity, blind type, dimensions, tube requirements and required accessories so the supply configuration can be confirmed.




