Description
High-Capacity Illumination Control: KNX 3 Fold 600W Dimming Actuator
In large-scale commercial real estate, high-wattage lighting zones require actuators that transcend standard residential load limits. The SIXIN KNX 3 Fold 600W Dimming Actuator (Model: DM0103.0610) is an industrial-grade, 12U DIN-rail modular device engineered specifically to command heavy independent electrical AC impedance and capacitive loads. By delivering an exceptional 600W capacity across 3 independent channels, this device minimizes the quantity of actuators needed for expansive zones, optimizing distribution board layouts and significantly lowering the total cost of ownership for B2B procurement.
At the core of the DM0103.0610 is the advanced cold MOS power tube architecture. This technology masters both leading-edge (former cutting angle) and trailing-edge (along the cutting angle) dimming profiles. The device autonomously adapts to 50/60Hz power grid frequencies, delivering flawless 0% to 100% relative and absolute dimming. Crucially, the cold MOS deployment severely restricts electromagnetic interference and thermal accumulation, maintaining a full-load temperature rise of less than 50°C—a critical safety threshold for heavily populated commercial switchboards.
Technical Parameters (DM0103.0610 Official Specification)
| Category | Parameter | DM0103.0610 Specification |
|---|---|---|
| Power supply characteristics | KNX-Bus bus feed | DC 21V… 31V |
| Supply current | < 10mA | |
| Power consumption | <500mW | |
| Rated output characteristics | Load current detection range | 0.5 A… 20A; |
| Control folds on | 3 | |
| Rated operating voltage | 85~265V AC(50/60Hz) | |
| Rated operating current | 15 Amax (110v AC) | |
| Power loss per path | <4W | |
| Load characteristics | Resistive load | Including = 0.45 3A/230V AC; 1A\3A/230/110V AC |
| Capacitive load | 1A\3A/250V AC 140uf | |
| Turn off leakage current parameters | 50mA/MAX | |
| Cold start peak current | 10A 30A/220V AC, <120ms | |
| Service life | MTBF 100000 hours | |
| External connection | KNX-TP1 | KNX standard twisted-pair cable |
| Load end wiring terminal | 0.6Nm twist A moment for termination | |
| Operation and display interface | Programming buttons and corresponding indicator lights | LED |
| Channel status indicator | LED | |
| Enclosure protection class | IP20\ hidden cooling channel | EN60529 |
| Security level | EN61140 | |
| Insulation isolation | Overvoltage | EN60664-1 III |
| Power grid pollution | EN60664-1 2 | |
| KNX safety voltage | SELV | 30V DC |
| Temperature range | Operating temperature | – 5 C… +45 C (category 3K5) |
| Longterm -storage temperature | -25 C… +55 C | |
| Temperature in transit | -30 C… +70 C | |
| Environmental requirements | Maximum air humidity | 95% |
| Mechanical parameters | Volume | 12TE |
| Weight | 0.9kg | |
| Installation | 35mm U-guide rail (EN60715 EN50022) | |
| appearance | Gray, PC panel | |
| Certified | KNX EN50090-1-2 | |
| CE through | See Appendix for EMC metrics |
Algorithmic Configuration & Fail-Safe Diagnostics
Configuration of the physical address and distribution of parameters is executed entirely through the KNX bus via the ETS design tool. In alignment with global engineering standards up to April 2026, the actuator is fully validated for the ETS 6.4.1 environment, ensuring cutting-edge security and rapid topology deployment. For legacy retrofits, the DM0103.0610 continues to support VD3/VD4 file programming (ETS3 v1.3 and above).
Each of the 3 channels can be intricately parameterized to execute the following advanced B2B functions:
- Parallel Capacity & Soft Start: For extreme loads exceeding standard capacities, channels within the same phase load can be logically paralleled. A configurable soft start function protects heavy lighting banks from destructive inrush currents during initialization.
- Granular Transition Mechanics: Support for absolute and relative dimming protocols. Integrators can dictate the ‘move light speed’—defining the exact time required to transition from 0% to 100% brightness, safeguarding lamp filaments and ensuring seamless architectural transitions.
- Advanced Temporal Logistics: Time functions include open delay, close delay, and open-auto-close sequences, ideal for stairwells, exterior facade lighting, and automated security perimeters.
- Real-Time Asset Diagnostics: The actuator constantly executes active current detection (alerting the BMS if current breaches the nominal scope) and temperature detection to trigger automatic shutdown protocols before thermal damage occurs.
- Regional Restrictions & Scene Execution: Define specific light areas and limit maximum outputs per zone. Incorporates deep memory mapping for up to 8 unique scene settings per channel.
- Manual Overrides: Visible LED state indicators and physical push buttons allow on-site contractors to manually open or adjust each channel directly from the electrical board during the commissioning phase.
Wholesale & Integrator FAQ: 600W Phase-Cut Dimming Actuator
Q1: How does the 600W per channel rating impact large-scale commercial installations?
A: Standard KNX dimming actuators typically max out at 200W to 300W per channel. The KNX 3 Fold 600W Dimming Actuator effectively doubles that capacity. For system integrators, this means a single 3-fold module (12TE width) can command up to 1800W of total lighting load. This drastically reduces the number of actuators required in the distribution board, lowering per-channel hardware costs and minimizing DIN-rail footprint for heavy-load zones like hotel lobbies and theater halls.
Q2: Which transformer types are compatible with this phase-cut dimming actuator?
A: The DM0103.0610 utilizes sophisticated leading and trailing edge phase-cut logic. It is engineered to seamlessly drive ordinary incandescent bulbs, as well as low-voltage halogen lamps connected to either legacy ferromagnetic transformers or modern electronic transformers. It natively handles both resistive and capacitive loads with exceptional stability.
Q3: Can multiple channels be paralleled for loads exceeding 600W?
A: Yes. The actuator’s internal architecture allows modules within the same channel phase load to be combined for parallel capacity. When integrating ultra-heavy loads, contractors can parallel the outputs and engage the software-defined soft start function. This securely manages cold start peak currents (up to 30A for <120ms) without triggering the enclosure’s safety breakers.
Q4: Is the DM0103.0610 firmware updated for the 2026 ETS 6.4.1 standards?
A: Absolutely. To ensure compliance with modern B2B project tenders, the device’s firmware and database files have been strictly audited as of April 2026 to guarantee 100% compatibility with the ETS 6.4.1 software. The device maintains full functionality for absolute/relative dimming, scene allocation, and fault telemetry without any system translation errors.
Q5: How does the cold MOS power tube mitigate thermal accumulation in 12TE enclosures?
A: Traditional thyristor (triac) dimmers generate substantial waste heat, often necessitating active cooling in electrical cabinets. The advanced cold MOS power tube drastically improves power conversion efficiency. Even when processing its maximum 600W load across all 3 folds, the actuator guarantees a full-load temperature rise of below 50°C, ensuring the longevity of adjacent DIN-rail components and averting thermal alarms.




