Description
Advanced 4-Channel Automation: KNX 4 Fold Curtain Actuator WD0204.0801
In the global architecture of smart commercial buildings and luxury residential complexes, spatial efficiency within electrical cabinets is paramount. The SIXIN KNX 4 Fold Curtain Actuator (Model: WD0204.0801) addresses this B2B engineering challenge by consolidating four independent motor control circuits into a highly robust, DIN-rail mounted module. As a foundational element of the KNX building electrical control system, this actuator regulates AC loads dynamically without the requirement for auxiliary power supplies, drawing its operational energy directly from the 21V-31V KNX bus feed.
The core operating principle of the WD0204.0801 revolves around precision phase management. AC shutter and curtain motors demand simultaneous, safely interlocked clockwise and anti-clockwise signaling to function without short-circuiting. Our 4-fold actuator executes this logic natively on the hardware level, protecting expensive window treatments from incorrect operational commands sent over the bus network.
Comprehensive Core Functions for Global Integrators
To meet the diverse demands of international contractors, the WD0204.0801 supports an extensive array of parameterizations configurable via the engineering debugging tool, ETS. The following sophisticated functions can be set independently for each of the 4 single ways:
- 1) Curtain control function: Precise, software-defined control over the clockwise and anti-clockwise operation of the curtain motor, including exact travel time calibration to prevent mechanical strain at the end limits.
- 2) Time control function: Programmable ON/OFF operations featuring an adjustable latency time. This critical feature prevents electrical arcing when switching direction, thereby exponentially increasing the mechanical and electrical life of the relay contacts.
- 3) Scene and pre-set control: Memory allocation for up to 8 scenes or 1 discrete pre-set position per channel. This allows the KNX network to execute complex environmental shifts (e.g., triggering a ‘Presentation Mode’ to lower 4 separate blinds simultaneously to 80% opacity).
- 4) Manual operation and safety function: Physical tactile buttons on the actuator face allow manual override. The switch statuses are externally visible via LED indicators, facilitating rapid fault isolation during standard maintenance cycles.
- 5) Self-recovery of relay switch location: Unmatched resilience against grid instability. Integrators dictate exactly how the motor behaves after a bus voltage disconnection and subsequent recovery, ensuring the facility does not compromise its thermal envelope or security due to a temporary network drop.
Technical Parameters
| Category | Parameter | Value |
|---|---|---|
| Power supply Characteristics | KNX-Bus feed | DC 21V…31V |
| Supply current | < 12mA | |
| Consumption | <360mW | |
| Control ways | 4 channels | |
| Rated operational voltage | 110~400V AC(50/60Hz) | |
| Power loss of every input | 1.5W | |
| Working life | Switch mechanical life | >2000000 times |
| Contact electrical life | comply with IEC 60947-4-1 | |
| µ=0.8/240V | >100000 times | |
| µ=0.45/240V | >30000 times | |
| External connection | EIB/KNX Bus | paired cable comply with KNX standard are required EIB/KNX bus terminal (diameter 0.8mm) |
| Load-end terminal | minimum 0.6Nm torque are required for termination | |
| Operation and display interface | Programming button and corresponding indicator | Button distributes address, program Red LED flicker indicates proper function |
| Status indication of switch position | Green LED indicates corresponding operation | |
| Enclosure protection | IP20 | EN60529 |
| Safety level | II | EN61140 |
| Insulated isolation | Overvoltage | EN60664-1 III |
| Electric network pollution | EN60664-1 2 | |
| KNX safety level | SELV | 24V DC |
| Temperature range | Operation temperature | -5℃…+45℃ (3K5type) |
| Storage temperature | -25℃…+55℃ | |
| Transportation temperature | -30℃…+70℃ | |
| Environmental requirement | Maximum humidity | 93%, (condensation is exclusive) |
| Mechanical parameter | Size | 4TE |
| Weight | 0.3 kg | |
| Installation | 35mm U-shape rail (EN60715 EN50022) | |
| Appearance | Gary-white, PVC panel |
System Integrator Deployment Strategy
The distribution of the physical address and comprehensive parameter setting is streamlined for efficiency. Applying the engineering debugging tool ETS can easily complete the debugging of the entire system. B2B wholesale buyers and integrators will appreciate that configuration can be finalized using legacy ETS versions (more than ETS3 V1.3) with standard VD3/VD4 files. Crucially, the VD4 file architecture guarantees compliance, and as verified in April 2026, the device is fully vetted for ETS 6.4.1 integration, eliminating firmware bottlenecks in modern project tenders.
Furthermore, the physical construction mandates a minimum 0.6Nm torque for termination at the load-end, adhering to rigorous industrial safety protocols to prevent arcing in high-voltage (110~400V AC) environments.
Global Engineering FAQ: KNX 4 Fold Curtain Actuator
Q1: What is the distinct deployment advantage of using a 4-fold actuator over two 2-fold models?
A: Spatial and economic efficiency. The KNX 4 Fold Curtain Actuator WD0204.0801 allows system integrators to control four separate AC motors from a single KNX bus node. This reduces the number of physical KNX addresses required, minimizes the internal wiring footprint inside the distribution cabinet, and significantly lowers the overall hardware expenditure for large B2B commercial projects.
Q2: Can the WD0204.0801 securely handle high-inrush currents associated with industrial blinds?
A: Yes. The internal relays are engineered to comply with the IEC 60947-4-1 contact electrical life standards. Each of the 4 control points sustains a maximum output load current of 10A (AC). Additionally, the device features a programmable adjustable latency time for ON/OFF switching, which acts as a protective buffer against back-EMF and inductive spikes during motor directional changes.
Q3: How does the actuator function during unexpected KNX bus power loss?
A: Facility safety is inherently programmed into the module. It utilizes a self-recovery function for the relay switch locations. Through ETS, engineers can dictate exactly which position (e.g., Open, Closed, or frozen) the motors should adopt upon a bus voltage disconnection, and the exact sequence of recovery when power is restored, preventing unpredictable architectural shifts.
Q4: Is the WD0204.0801 compatible with the latest ETS 6.4.1 environment for 2026 project tenders?
A: Absolutely. In addition to accommodating older protocols (ETS3 V1.3+ via VD3 files), we have ensured the device is 100% compliant with the newest ETS 6.4.1 software (as of April 2026). You only need to import the standard VD4 file to access all advanced parameter logic, ensuring modern commissioning standards are met.
Q5: How can field engineers test the motorized shutter wiring before the software is programmed?
A: The actuator supports complete manual operation autonomy. Field technicians can utilize the physical buttons on the face of the actuator to trigger clockwise or anti-clockwise rotations manually. The external Green LED indicators display the corresponding operational status, allowing for immediate electrical verification without requiring ETS software connectivity.





